Skip to main content

How to set up and customize the Quantity/Value table widget in Discounty?

Show Quantity discount and Cart goal tiers on product pages and a discount badge on collection cards with the Quantity/Value table widget.

"Buy more, save more" offers only work when customers can see them. The Quantity/Value table widget shows your Quantity discount and Cart goal tiers on the product page, and a small discount badge on product cards while customers browse. You manage both from one page:

  • A tier table on the product page, built from columns you choose, so customers can see how much they save as they buy more.

  • A small discount badge on product cards on your home and collection pages, so the offer shows while customers are still browsing.

The widget only displays the offer. It doesn't change the product price. Your campaign applies the discount.

Before you start

  • Make sure the Discounty app embed is enabled on your active theme (see How to activate Discounty widgets on your Shopify store?). The Customization page shows a banner if the app embed isn't active, and this widget page shows an Enable app embed notice at the bottom of Display widget on.

  • Have an Active Quantity discount or Cart goal campaign. The table and badge only appear on products included in an Active campaign.

Where to find the widget

  1. In the Discounty app, open Customization.

  2. Select the Quantity/Value table card. It's listed under the Quantity discount and Cart goal filters.

  3. The widget page opens with the title Quantity & volume discount. All settings for the table and the badge are on this page.

Step 1: Choose where the widget shows

At the top of the page, under Display widget on, turn on the places you want:

  • Product page: shows the tier table on product pages.

  • Home & collection page: shows the discount badge on product cards outside product pages, such as your home page and collection pages.

The Product page toggle is the main switch for the widget. If it's off, the badge doesn't show on your storefront either, even when Home & collection page is on.

Quantity discount widget customization — Display widget on and Text customization

Step 2: Customize the product-page table

The table lists your discount tiers on the product page. It follows the variant the customer has selected, so it only appears when that variant is part of an Active campaign.

Text customization

Under Text customization you can edit:

  • The Title (default: Buy more, Save more).

The wording of the "Eligible items" link is set in the Eligible items link card, described below. The wording inside the table itself, including each column's header and what every tier row says, is set under Columns, described next.

Columns

Under Columns you build the tier table one column at a time. Each column is one header plus what to show in every tier row. The same table and the same Columns builder are used for Quantity discount and Cart goal campaigns. You can show between 1 and 5 columns, and a counter next to Columns shows how many you're using (for example, 2 of 5 columns).

Each column has:

  • Header: the title of the column, up to 60 characters.

  • Shows: the text shown in every tier row of that column, up to 120 characters. Write your own wording and click a variable to insert it where your cursor is. The variables appear while you're editing the field.

The defaults are {quantity_range} and {discount} off.

You can use these variables in Shows:

  • {quantity_range}: the tier quantity as a range, for example 2 - 4. The last tier ends with a plus.

  • {quantity_plus}: the tier's minimum quantity with a plus, for example 2+.

  • {discount}: the amount off for the tier, as a percent or an amount of money (for example 10% or $2.00).

  • {discount_percent}: the percent off each item.

  • {discount_amount}: the amount off each item.

  • {new_price}: the price of each item after the discount.

  • {original_price}: the price before the discount.

  • {total_price}: the total for the tier quantity.

  • {total_savings}: the total saved at the tier quantity.

To add, arrange or reset columns:

  • Select Add column and pick a preset: Quantity, Discount, Discount %, New price, You save, Total or Blank column (Start from scratch). You can edit the header and text afterwards.

  • Use Move column up and Move column down to change the order, or Remove column to delete one. The table always keeps at least one column.

  • Select Reset to default columns to go back to the default setup.

Different text per campaign type is an option on each column. Tick it if one column should read differently depending on how the campaign gives the discount. Four fields appear: Percentage, Fixed amount per item, Fixed amount on order and New price. Leave a field empty to show the column's main text for that campaign type. Leave the option unticked and the column shows the same text for every campaign type.

If a column is empty, is too long, or uses a variable that doesn't exist, it's highlighted, and you need to fix it before you can save. Tables set up before Columns existed keep looking the same until you change them.

For Cart goal campaigns, the tiers show amounts in your store currency instead of quantities.

Product-page preview of the tiered discount table

Eligible items link

When the link is shown, shoppers see an Eligible items link on the product page. It opens a window listing every product the campaign applies to, with its image, title and a link to the product, so shoppers can find the qualifying products without leaving the page.

  • The link only appears when the campaign covers 2 or more products.

  • The list loads 100 products at a time. Select Load more to show the next batch.

  • If only some options of a product qualify, that product shows Eligible options followed by the matching variants, for example "Eligible options: Blue / M, Blue / L". Products where every option qualifies show no note.

You choose whether the link shows and where it sits in the Eligible items link card:

  • Show "Eligible items" link: tick it to show the link on the product page, or leave it unticked to hide it. The settings below appear once it's ticked.

  • Position: Below the table, Above the table or Next to the title.

  • Alignment: Left, Center or Right. It isn't available for Next to the title.

  • "Eligible items" link text: the wording of the link, which is also the title of the window it opens (default: "Eligible items"). It's required while the link is shown.

The preview on the right follows the position and alignment you pick.

Step 3: Customize the home & collection page badge

When Home & collection page is on, a Home & collection page badge content section appears under Discount content. Pick a Display mode:

  • Show maximum discount: for example, "Up to 20% off". Edit the wording in Max discount text. The {discount} variable is required and is replaced by the value of the largest tier.

  • Show lowest price after discount: for example, "From $9.99". Edit the wording in Lowest price text. The {price} variable is required and is replaced by the lowest price a customer can reach with the largest tier, in your store's currency format.

Both modes take their values from your Active campaign, so there's nothing to enter by hand. The defaults are Up to {discount}% off and From {price}. {discount} is replaced by the number only, so if your campaign uses a fixed amount instead of a percentage, change the text around it.

The badge appears on product cards for products with an Active Quantity discount or Cart goal campaign. Cards without a discount show no badge.

The badge texts can't be translated yet. They show in the language you write them in on every version of your store.

Collection and home preview showing the discount badge on product cards

Step 4: Styles

Under Styles you can set:

  • Table background color and Table text color.

  • Title color and Border color.

  • Border radius: how rounded the table corners are (0 to 35 px). The badge uses the same radius.

The Header & badge colors section is optional and defaults to your table colors. Its Header background color and Header text color set the table's header row and are also used for the discount badge on product cards, so the badge always matches your table.

Styles is included on the Lite plan and above. If your plan doesn't include it, a lock icon appears next to Styles. Click it to upgrade. Style fields are also disabled while the Product page toggle is off.

Styles and Header and badge colors settings

Step 5: Preview and save

The Preview on the right updates as you type:

  • Switch between the Product page and Collection & home views to check both.

  • In the product page view, use Preview as to see how the table reads for each campaign type: Percentage, Fixed amount per item, Fixed amount on order or New price. It only changes the preview, not your storefront.

Each section has a Reset to default link if you want to start over. In the Eligible items link card it restores the position, alignment and link text, and leaves the Show "Eligible items" link checkbox as you set it. When you're happy with the result, click Save. Your changes go live on your storefront right away.

Translating the widget text

The Title, each column's header and text (including any Different text per campaign type texts) and the "Eligible items" link text can be translated into each language your store sells in, from the Translations section on the same page, manually or with AI. A translated column text has to use the same variables as the original text, and if the original has no variables, the translation can't have any either. The home & collection page badge texts can't be translated. See How do I translate Discounty widgets for a multi-language store?.

When the table or badge doesn't appear

The table or badge is hidden if any of these apply:

  • The Product page toggle is off. This hides both the table and the badge.

  • For the badge: the Home & collection page toggle is off.

  • The product isn't part of an Active Quantity discount or Cart goal campaign. Check that the campaign is Active and that the product (and the selected variant) is in the campaign's product selection.

  • The Discounty app embed isn't enabled on your active theme.

  • For the badge: you're on a product page. Product pages show the full table instead.

  • The campaign targets a purchase type (subscription or one-time) that doesn't match what the customer is viewing.

  • For the "Eligible items" link: the campaign covers only one product (the link only shows when a campaign covers 2 or more products), or Show "Eligible items" link is unticked in the Eligible items link card.

If everything above checks out and the widget still doesn't show, your theme or page builder may need a manual adjustment. Contact support with your theme name.

Custom CSS

The Custom CSS card on this page has two boxes, one for the table and one for the badge. Each applies to its own widget only, and the preview updates as you type. See How to add custom CSS to your Discounty widgets?

Related articles

Need a hand? Contact our support team through the app — we're happy to help.

Did this answer your question?